Outback Armour - Toyota Hilux Gen 8 2015+ Suspension Lift

  • Outback Armour Suspension - Toyota Hilux Generation 8 2015+
  • Outback Armour Suspension - Toyota Hilux Generation 8 2015+
  • Outback Armour Suspension - Toyota Hilux Generation 8 2015+
  • Outback Armour Suspension - Toyota Hilux Generation 8 2015+
  • Outback Armour Suspension - Toyota Hilux Generation 8 2015+
  • Outback Armour Suspension - Toyota Hilux Generation 8 2015+
  • Outback Armour Suspension - Toyota Hilux Generation 8 2015+
  • Outback Armour Suspension - Toyota Hilux Generation 8 2015+
$1,965.00
SKU:
oba-TOHIG8

Shop With Confidence          

Murchison Products Shipping Information Delivery Aus Wide Secure Shopping Secure Shopping
Payment Options Contact Us

Australian designed & engineered 4x4 suspension & rated recovery gear for enthusiasts, fleet & defense.

Please Note:

  • Select whether you want the front struts pre-assembled. If not, the coil and strut will need to be assemled before install
  • Select the appropriate matching front and rear suspension
  • The Front Bump / Jounce Stop kit is needed if you have a front bar & winch.
  • We recommend you install the Center Bearing Spacer Kit, this helps to improve tail shaft angle and reduce vibrations.

 

Toyota Hilux Front Suspension Options

  • Trail Suspension Kit Front
    Lift front: up to 50mm (height adjustable struts). - Suits OEM bumper or light bullbar.

  • Expedition Suspension Kit Front
    Lift front: 50mm (height adjustable struts). - Suits vehicles with steel bullbar & medium front loads.

  • Expedition HD Suspension Kit Front
    Lift front: 50mm (@ approx 100kg load). - Suits vehicles with heavy steel bullbar & winch applications.

  • Bump / Jounce Stop Kit Front
    Rubber, extended progressive rate (60mm / M10x25mm).

 

Toyota Hilux Rear Suspension Options

  • Trail Suspension Kit Rear
    Lift rear: 50mm (approx unladen) - (Adjustable Link Rod Kit required for SR5 models)
     
  • Expedition Suspension Kit Rear
    Lift rear: 50mm (@ approx 150kg load) - (Adjustable Link Rod Kit required for SR5 models)
     
  • Expedition HD Suspension Kit Rear
    Lift rear: 50mm (@ approx 450kg load) - (Adjustable Link Rod Kit required for SR5 models)
     
  • Expedition XHD Suspension Kit Rear
    Lift rear: 50mm (@ approx 800kg load) - (Adjustable Link Rod Kit required for SR5 models)
  • Bump / Jounce Stops Rear - (2 per kit)
    Rubber, extended progressive rate (suits leaf springs.) - Highly recommended for vehicles with heavy rear loads.
 
 

Correction Components

  • Adjustable Link Rod Kit
    Required for all SR5 models. The Adjustable Link Rod kit allows for HID headlight levelling & shackle grease nipple clearance.
     
  • Centre Bearing Spacer Kit
    Recommended for all lifts to improve tailshaft angle and reduce vibrations.
     
  • Pin Protector Cap
    Recommended for all Gen8 Hilux models. The Pin protector cap helps reduce the chance of rupturing the fuel tank in side impact.

 

X