Chief Products WK2 Roof Rack provides the pinnacle of performance for roof rack systems on the WK2 (Jeep Grand Cherokee, 2011-2020). It delivers industry leading load ratings (150kg dynamic & 600kg static) in an extremely lightweight and low profile design. Most impressively, the modular design provides an unprecedented amount of configurability, allowing you to mix-and-match components to create exactly the rack system you want.
The Overland Edition is designed to provide maximum functionality when Overlanding. We start with our Mounting Rails, then add (4) Planks, (8) End-Caps (featuring 7 slots just like the traditional Jeep grille), our Roof Top Tent KIT (to make RTT installation super easy) and finish with (4) Tie-Down Plates. The modular design allows you to easily remove/reposition the planks to suit the needs of your current adventure. The Tie-Down Plates are designed to be multi-functional and can accommodate numerous accessories and tie-down strap configurations. This configuration delivers industry leading load ratings (150kg dynamic & 600kg static) and a nearly unlimited amount of mounting locations for accessories.
IN THE BOX (OVERLAND EDITION)
1 [MOUNTING RAILS ONLY]
2 ROOF RACK (2x Plank KIT -- 1146MM)
2 ROOF RACK (4x Plank End-Cap KIT -- Slotted)
1 ROOF RACK (Roof Top Tent KIT)
2 ROOF RACK (2x Tie-Down Plate KIT)
1 Installation Instructions
Aircraft-Grade Aluminium Alloys (High Strength to Weight Ratio)
E-Coat (Industry Leading Corrosion Resistance)
Durable Powder Coat Finish
Easy Installation (Difficulty = 2/10)
**DYNAMIC LOAD RATING = 150kg (330lbs) [Independently Certified]
**STATIC LOAD RATING = 600kg (1,322lbs) [Independently Certified]
HEIGHT = 86mm (above roof line)
PLANK THICKNESS = 25mm
PLATFORM THICKNESS = 28.34mm (fully assembled)
FULLY INSTALLED WEIGHT [Full Roof Rack System] = 26.02kg
FULLY INSTALLED WEIGHT [Safari Edition] = 20.5kg
FULLY INSTALLED WEIGHT [Roof Top Tent Edition] = 11.4kg
FULLY INSTALLED WEIGHT [Bare Bones Edition] = 9.9kg
FULLY INSTALLED WEIGHT [PLATFORM ONLY] = 22kg
FULLY INSTALLED WEIGHT [MOUNTING RAILS ONLY] = 6.4kg
Chief Roof Rack Accessories
Chief Tie Down Points
Tie-Down Plates are engineered to provide numerous ways to secure gear and accessories to your roof rack. They clamp securely between our Planks in a way that allows them to easily move and fasten anywhere along the entire length of the Planks. Manufactured from Aircraft-Grade Aluminium Alloys and High-Strength Steel, they're extremely strong to meet the high demands they're sure to encounter. The centre acts as an easy tie-down location, while the slots on either end hold captive T-Nuts (M8 & M10) that can be used to fasten/bolt just about any accessory you can find. Best of all, when clamped in place they sit completely flush, providing a completely smooth top surface for your platform.
T-Nuts for Roof Platform
This T-Nut Kits includes three sizes (M6, M8 & M10) to accommodate any accessory you find. Designed to fit perfectly within our Planks and Tie-Down Plates. These high-tensile 10.9 Grade T-Nuts can handle anything you throw at them. Blackened to look great when installed, and coated in Black Oxide to ensure they stay that way even in the most hostile environments.